12GB 4mm DDS-3 internal tape for Ultra 150 and Netra 150 systems and Enterprise 250 & 450 systems
8 bay internal storage expansion kit for Enterprise 450 Server, includes 8 slot disk backplane, PCI UltraSCSI controller, and cables
Redundant FC 8-port switch includes 2 8-port fibre channel switches Documentation (Release Notes, Installation Guide, Sun Switch Configuration Guide,...
73GB 10,000 rpm 1-inch FCAL disk drive ATO option for Sun Fire 280R with preinstalled Solaris 8 Operating Environment.
23 inch rack mount kit for Netra t 1125 or 1120 The kit contains four flanges, two handles and flange fixing screws that can be fitted to the front,...
24 inch rack mount kit for Netra t 1125 or 1120. Kit contains four flanges, two handles & flange fixing screws to fit at the front, mid or rear...
600mm rack mount kit for Netra t 1125/1120, Netra 20. Kit contains four flanges, two handles & flange fixing screws that can be fitted to front, mid...
19" Rack Mount Kit. Works with StorEdge S1, Netra t1, Netra st D130. Includes front or center fixed mount brackets and front & rear mount rail...
UltraSPARC III Cu 900 MHz processor module w/ 8MB L2 cache for Sun Blade 1000/2000, Sun Fire 280R, Netra 20.
512 MByte Memory Expansion (4 x 128MB memory modules) For use in Sun Blade 1000 and 2000 workstations, Netra 20 & Sun Fire 280R servers
4-Gbyte Memory Expansion (4 x 1GB memory DIMMs) For use in Netra 20, Sun Fire 280R, Sun Blade 1K and 2K
1 Gbyte Memory Expansion Kit (4 x 256-Mbyte DIMMs) For use in Sun Fire 280R and Sun Blade 1000 and 2000
1.015GHz UltraSPARC III Cu processor module with 8MB L2 cache for Sun Fire 280R. Field installable x-option.
23 inch rack mount kit for Netra t 1405 or 1400 The kit contains four flanges, two handles & flange fixing screws that can be fitted at the front mid...
600mm rack mount kit for Netra t 1405 or 1400 The kit contains four flanges, two handles & flange fixing screws that can be fitted at the front mid...
Air filter pack for Netra t 1400 and Netra t 1405. Contains 5 foam filters to replace used filters in the system.
A universal rack slide adaptor kit for 19-inch rack-mounts capable of supporting a wide range of 19-inch racks.
24.1-inch LCD Monitor, 1920x1200 @ 60Hz, DVI-D digital, 13W3 analog, S-video and C-video interfaces, 4-port USB hub, DVI-D, 13W3, and HD15 video...
18.1" TFT LCD color monitor (20" CRT equivalent), PVA wide viewing angle, 1280x1024 @ 60/76Hz, analog RGB interface, digital DVI interface, DVI-D,...
17-inch Entry color monitor, 15.7" diagonal viewable area, .28mm dot pitch, 1152x900 @ 66/76Hz, 1024x768 @ 60/77Hz, 30-75kHz, MPR-II, TCO'99,...
21-inch Color monitor, 19.8" v.a. 0.24mm dot pitch aperture grille, 30-130kHz, WW agency compliance, 2m DB13W3 captive video cable and HD15-pin...
21-inch Color monitor, 19.8" v.a. 0.24mm dot pitch aperture grille, 30-130kHz, WW agency compliance, 2m DB13W3 captive video cable and HD15-pin...
Netra ct 800 Rear access version: 6 standard Hot Swap cPCI with H.110 and alarm card. 440MHz UltraSPARC IIi, 1GB RAM, 2x36GB HDD, redundant 360W DC...
Netra ct 400 Rear access version: 2 standard Hot Swap cPCI with H.110 and a alarm card. 440MHz UltraSPARC IIi, 1GB RAM, 36GB HDD, 360W DC PSU, 3U...
NETRA CT 400 3U alarm 2slot Fr wide and design for the 400 with the HDD option. It provides a Ethernet port, a RS-232 port and an alarm console . A...
Netra ct 6U alarm card is used in Netra ct 800 Servers. It is a single slot wide and can provide rear access cable routing with optional RTM. It...
Netra ct DC power supply. This is a DC power supply that is used in both the Netra ct 400 and Netra ct 800
Netra ct System Control Board The same system control board is used in the Netra ct 400 and Netra ct 800.
Netra ct 400 Front Access version: 2 standard cPCI Hot swap with H.110 and alarm card. 440MHz ultraSPARC IIi, 1GB RAM, 36GB HDD 360W DC PSU, 2 slot...
Netra ct DC PSU air filter 20P This is a replacement filter for the DC power supply filter. It's situated at the front of the power supply and is...
NETRA CT 800 DF 440/1GB/2HD/CA 5 standard Hot Swap cPCI with H.110 and alarm card. 440MHz UltraSPARC IIi, 1GB RAM, 2x36GB HDD, redundant 360W DC PSU,...
X-Option - Air filter pack for the Netra 20 AC/DC rack-optimised servers. Contains 10 foam filters, to be used as replacement filters in the system,...
X-Option - Plastic front facia kit for the Netra 20 AC/DC rack-optimised servers. Replacement facia to be used where original facia is damaged....
Enterprise Cabinet Floor Brackets for 56" and 68" System and Expansion Cabinet. OEM ready - 09/96
Upgrade from StorEdge T3 to T3B hardware RAID controller. Includes T3B controller with 1GB cache, 0.4m FC-AL cable, SC-SC coupler and documentations.
A1000/D1000 Universal Rackmount kit for tabletop conversion, includes rails and rackmount tray. Supports Sun Fire Cabinet, StorEdge Expansion...
